Pexip Infinity Integration

  • Updated on Dec 10, 2025
  • Published on Oct 31, 2025
  • 2 minute(s) read
  • s
  • s
 Prev Next

Step 1 - Validate the Service Account for Pexip Infinity

The WXP Collaboration Data Collector uses the Pexip Management Node admin account to connect to Pexip Infinity. This is the same account you use to sign in to the Pexip Management Web Portal.
To verify the credentials for the Pexip Management Node, follow these steps:

  1. Open a web browser. Go to the domain name or IP address of the Pexip Management Node.
  2. Enter the admin username and password for the Pexip Management Node.
  3. Confirm that you can successfully sign in.

image.png

Fig 1. Pexip Management Node Login Page

Note

If the Pexip Management Node is LDAP-integrated, only a local admin account can be used for the Pexip Connector. If the User Authentication Source is set to LDAP database only, the Pexip admin account must be used.

Step 2 – Add a Pexip Connector

To add a Pexip Connector, you need:

  • Web browser access to the Pexip Node from the WXP Collaboration Data Collector.
  • Admin account credentials for the Pexip Management Node (from Step 1).

Follow these steps to add a Pexip Infinity device:

  1. Sign in to the WXP Collaboration Admin Portal and open the Tech Insights Administration Portal.
  2. From the menu or icon, select Infrastructure > New Infrastructure.
  3. From the list of infrastructure types, click Pexip.

image.png

  1. Enter the connection and account details:

image.png

Note

We recommend using a hostname rather than an IP address, as IP addresses are subject to change. It is also helpful to name the infrastructure in a 'friendly' or easily understood way.

  • In Description, enter details such as device type, location, and other unique identifiers.

  • In Hostname or IP address, enter the Pexip Management Node hostname or IP.

  • In Username and Password, enter the admin account credentials.

  1. Click Save. After saving, two new buttons appear: Disabled (top) and Validate (bottom).
  2. Select Validate to confirm that the collector can connect to the infrastructure. A pop-up appears.

image.png

  1. If validation fails, select the Details arrow for possible causes, such as invalid credentials or network issues. Resolve the issues and retry.
  2. When validation succeeds, change the Disabled button to Enabled to start monitoring and data collection.
Your Setup is Now Complete

Pexip Infinity Reference Table

Pexip Infinity
Version Pexip Infinity 10 or above
Device Access Server IP/FQDN of Pexip Management Node(s)
User/Service Account Local account with full Administrator access
WXP Collaboration Data Collector to Pexip Management Node(s)
TCP Ports TCP 443*

Contact Us

For any assistance, create a support case or email us at support@wxp.hp.com.

Related articles