--- title: "Setting Up freeFTPd for WXP Collaboration Monitoring" slug: "wxp-collaboration-monitoring-installing-and-configuring-freeftpd" tags: ["WXP Collaboration"] updated: 2026-06-24T22:36:48Z published: 2026-06-24T22:36:48Z canonical: "learn.workforceexperience.hp.com/wxp-collaboration-monitoring-installing-and-configuring-freeftpd" --- > ## Documentation Index > Fetch the complete documentation index at: https://learn.workforceexperience.hp.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting Up freeFTPd for WXP Collaboration Monitoring ## Introduction The WXP Collaboration Platform utilizes freeFTPd to facilitate secure file transfers for monitoring activities. This article explains how to install, configure, and test your freeFTPd environment, while providing troubleshooting steps to resolve common connection issues. ## **Obtaining FreeFTPd** freeFTPd is an open-source FTP/SFTP server for Windows that can be downloaded from the internet without registration. ## Installing the Server Once downloaded, the executable may be simply double-clicked to install the server. If UAC is triggered, then select **Yes** to allow the installation to proceed. Step through to accept the defaults at each stage of installation, and click **Close** when prompted to try other products. The final step of the installation will ask if you wish to run the program as a system service. ![](https://cdn.us.document360.io/c9ecd56a-08d4-4e2f-ab71-60540f7ba8f3/Images/Documentation/image-KUD5EQYG.png?sv=2026-02-06&spr=https&st=2026-11-19T20%3A56%3A49Z&se=2026-11-19T21%3A56%3A49Z&sr=b&sp=r&sig=gQmg2cfMWqy90Ca2mqBKfibff4CY6JdAMm6r2T5E6hU%3D) Select **Yes**, and once the service has started, click **Finish**. ## Configuring the Server The freeFTPd utility should be started using the desktop shortcut or from Start. > [!NOTE] > Note > > This utility should be executed with Run as administrator Once running, the utility will allow the server to be configured, and its initial status will be displayed. ![](https://cdn.us.document360.io/c9ecd56a-08d4-4e2f-ab71-60540f7ba8f3/Images/Documentation/image-PMJG8RA6.png?sv=2026-02-06&spr=https&st=2026-11-19T20%3A56%3A49Z&se=2026-11-19T21%3A56%3A49Z&sr=b&sp=r&sig=r%2BXA%2BNyF3rvubrHgKHjaKsm50eEmCjxXETnhX4j9mNM%3D) Change the **SFTP root directory** to C:\WXPCollaboration\SFTP and select **Start** to run the server. If prompted to permit network access, select **Allow access**. ![](https://cdn.us.document360.io/c9ecd56a-08d4-4e2f-ab71-60540f7ba8f3/Images/Documentation/image-ZXY610W7.png?sv=2026-02-06&spr=https&st=2026-11-19T20%3A56%3A49Z&se=2026-11-19T21%3A56%3A49Z&sr=b&sp=r&sig=WV4Nr30jQDRtGi4aWo7cY6KMb3NalaDMkx6ULUYt70M%3D) Finally, in this pane, click **Apply and Save**. ## Configuring the User ![](https://cdn.us.document360.io/c9ecd56a-08d4-4e2f-ab71-60540f7ba8f3/Images/Documentation/image-JJSF297F.png?sv=2026-02-06&spr=https&st=2026-11-19T20%3A56%3A49Z&se=2026-11-19T21%3A56%3A49Z&sr=b&sp=r&sig=1i7rwYaleO8hLZuIyyspL5WcbKPzAl17nVI6GG4C%2BfQ%3D) Specify **Login** as VyoptaSFTP and ensure that **Authorization** is set to **Password saved as a SHA1 hash** by selecting the appropriate item from the dropdown. Choose and specify a password as appropriate, and finally ensure that the Home directory is specified as $SERVERROOT - this will need to be changed from the default value. Unselect the FTP server, leaving only SFTP enabled. Click **Apply** A panel will now display a summary of the configured user(s). Click **Apply & Save.** ![](https://cdn.us.document360.io/c9ecd56a-08d4-4e2f-ab71-60540f7ba8f3/Images/Documentation/image-0GXB4P2W.png?sv=2026-02-06&spr=https&st=2026-11-19T20%3A56%3A49Z&se=2026-11-19T21%3A56%3A49Z&sr=b&sp=r&sig=gXRfZYQ8FysXEBMMTkhJ6hFk2fLHDnBBOLQZUK1hWSs%3D) As soon as is practicable, you should reboot the server and verify that the service started as expected. ## Post Installation Testing ● Verify that you are able to connect to localhost using the expected credentials. ○ Install WinSCP on the machine running the data collector. ○ Connect to localhost. ○ Enter the username and password configured previously. ● Using the session established ○ Transfer any file. ○ Verify that the file is present in the expected directory and delete it. ● Perform the above tests from another machine ○ Verify that you can connect and transfer a file, as above. ● If possible, perform the above tests from a machine on the same network segment as your CUCM. ○ This will verify that connectivity is permitted over the same path as will be used in production. ## Troubleshooting ● The service has not started. ○ Verify that the service is set to start automatically (run services.msc and locate the service, right-click to obtain its properties, and select the appropriate startup type). ○ Verify that no other service is using port 22 (start a command prompt as administrator and run netstat -ban | more – find the entry for 0.0.0.0:22 and look at the name of the program beneath it). **Contact Us** For any assistance, email us at [support@wxp.hp.com](mailto:support@wxp.hp.com). For FedRAMP-specific support, email us at [fedramp-support@wxp.hp.com](mailto:fedramp-support@wxp.hp.com)