--- title: "Resolving CUCM Error: CucmMaintenanceException for listFiles" slug: "resolving-cucm-error-cucmmaintenanceexception-for-listfiles" tags: ["WXP Collaboration"] updated: 2026-04-09T12:08:39Z published: 2026-04-09T12:08:39Z canonical: "learn.workforceexperience.hp.com/resolving-cucm-error-cucmmaintenanceexception-for-listfiles" --- > ## Documentation Index > Fetch the complete documentation index at: https://learn.workforceexperience.hp.com/llms.txt > Use this file to discover all available pages before exploring further. # Resolving CUCM Error: CucmMaintenanceException for listFiles ## Introduction The WXP Collaboration platform sometimes has trouble retrieving CDR records for unknown reasons. This article explains how to resolve the “CucmMaintenanceException for listFiles” error that occurs when CUCM enters a maintenance state and prevents the WXP Collaboration data collector from retrieving CDR records. For unknown reasons, a CUCM may enter a maintenance state and fail to exit this condition cleanly. When this occurs, the following message is returned when the Vyopta data collector attempts to poll for CDR records: **"CucmMaintenanceException for listFiles"** Whilst the CUCM is in this condition, the data collector cannot retrieve call records. ## Solution The CUCM will need to be rebooted in order to clear this condition - as yet, no means of causing the CUCM to cleanly leave the maintenance state has been determined. In order to ascertain the cause of this issue, you may wish to raise a Cisco support case (TAC) before performing the reboot. **Contact Us** For any assistance, email us at [support@wxp.hp.com](mailto:support@wxp.hp.com). For FedRAMP-specific support, email us at [fedramp-support@wxp.hp.com](mailto:fedramp-support@wxp.hp.com)